固相萃取-气相色谱法测定水中硝基氯苯类化合物

建立固相萃取-气相色谱法测定水中15种硝基氯苯类化合物的方法。选用HLB柱为固相萃取柱,选用环己烷∶丙酮(3∶1,V∶V)混合溶剂作洗脱剂,得到方法检出限为0.011～0.040μg/L。空白水样加标回收率为73.6%～119%,相对标准偏差为6.1%～13.9%,精密度和准确度良好。对成分不复杂的实际水样进行测定,加标回收率为64.1%～118%,相对标准偏差为5.8%～15.6%,该方法能够基本满足成分不复杂的环境水体中痕量硝基氯苯类化合物的测定。     

基于有序Logit与Probit模型的交通事故严重性影响因素分析

为准确分析影响交通事故严重性的各项因素,引入有序选择模型中的Ordinal Logit模型和Ordinal Probit模型,研究驾驶员、车辆、环境、管理因素与事故严重程度之间的耦合关系,利用计量经济学理论和统计学方法对模型进行显著性检验。并选择美国北卡罗来纳州2010年至2014年385个翻车事故样本进行严重性影响因素分析,所得回归模型参数估计均符合Wald检验(p≤0.0001)和似然比检验(p≤0.0001),模型的拟合度也都符合Pearson检验(p=0.7976)、偏差检验(p=0.6006)和信息准则检验,模型预测精度指标值均大于0.7。所得两个模型中变量"安全带"(p≤0.001)、"路面状况"(p=0.0071)、"道路线形"(p=0.0077)、"路面类型"(p=0.0251)都对翻车事故的严重性具有显著影响,表明有序Logit模型和有序Probit模型均适用于分析和揭示影响交通事故严重性的各个因素。     

Structure optimization and annual performance analysis of the lens-walled compound parabolic concentrator

The primary lens-walled compound parabolic concentrator (lens-walled CPC) has a significant advantage of a larger half acceptance angle as a static solar concentrator, but it also has a drawback of a low optical efficiency. In order to overcome this drawback, in this article, series of structure parameters were investigated and compared to further improve the optical efficiency within the half acceptance angle combined with the material properties. The average optical efficiencies of the improved lens-walled CPCs could achieve more than 82% within the half acceptance angle of 35?. Experiments were adopted to verify the credibility and validity of the simulation. Moreover, annual performance of the lens-walled CPCs comparison with that of the mirror CPC for Nottingham was analyzed. Results show that the improved lens-walled CPC has a higher optical performance for actual building application.     

Comparative study on performances of a heat-pipe PV/T system and a heat-pipe solar water heating system

The heat-pipe solar water heating (HP-SWH) system and the heat-pipe photovoltaic/thermal (HP-PV/T) system are two practical solar systems, both of which use heat pipes to transfer heat. By selecting appropriate working fluid of the heat-pipes, these systems can be used in the cold region without being frozen. However, performances of these two solar systems are different because the HP-PV/T system can simultaneously provide electricity and heat, whereas the HP-SWH system provides heat only. In order to understand these two systems, this work presents a mathematical model for each system to study their one-day and annual performances. One-day simulation results showed that the HP-SWH system obtained more thermal energy and total energy than the HP-PV/T system while the HP-PV/T system achieved higher exergy efficiency than the HP-SWH system. Annual simulation results indicated that the HP-SWH system can heat the water to the available temperature (45°C) solely by solar energy for more than 121 days per year in typical climate regions of China, Hong Kong, Lhasa, and Beijing, while the HP-PV/T system can only work for not more than 102 days. The HP-PV/T system, however, can provide an additional electricity output of 73.019 kWh/m², 129.472 kWh/m², and 90.309 kWh/m² per unit collector area in the three regions, respectively.     

生态工程建设背景下贵州高原的植被变化及影响因素分析

基于MODIS-NDVI和气象数据，运用趋势分析、偏相关分析和残差分析等方法，对生态工程建设背景下贵州高原的植被变化及影响因素进行分析，并定量探讨气候因素与人类活动对植被变化的影响。结果表明：(1)2000~2016年期间，贵州高原植被NDVI在空间上呈东高西低的分布特征，高值分布于野生动植物及自然保护区等，低值分布于湿地保护工程区。NDVI总体呈上升趋势，湿地保护工程区、退耕还林工程区等植被覆盖上升速率较快，野生动植物及自然保护区呈略微的下降趋势。(2)植被改善区域(83.74%)分布于研究区边缘及西北部，退化区域(16.26%)分布于研究区中部和东南部，其中退耕还林还草工程区植被改善最为明显，野生动植物保护及自然保护区和速生丰产工程区改善效果较差。(3)从气侯因素分析来看，气温和降水在总体上与NDVI均呈正相关，气温对贵州高原植被生长的影响大于降水。(4) 从人类活动分析来看，人类活动对植被的建设作用强于破坏作用，人类活动正作用（76.68%）主要分布于西北部，负作用（23.32%）集中分布于东南部。植被覆盖增加是气候因素和人类活动共同作用的结果，人类活动对植被的贡献率为75.53%，气候因素为24.47%。     

Chemical additives affect sulfate reducing bacteria biofilm properties adsorbed on stainless steel 316L surface in circulating cooling water system

This paper studied the biofilm properties and corrosion behavior of sulfate reducing bacteria (SRB) on stainless steel 316L (SS316L) surface in circulating cooling water system with and without additives including hydroxy ethyl fork phosphonic acid (HEDP), dodecyl dimethyl benzyl ammonium chlotide (1227) and NaClO. Biochemical technique, electrochemical technology, X-ray photoelectron spectroscopy (XPS) and scanning electron microscope (SEM) were used. The results show that the extracellular polymeric substance (EPS) in biofilm attached on the SS316L surface mainly contain proteins and polysaccharides, the contents are 98 ug·cm^-2 and 635ug·cm^-2, respectively. The polysaccharides were cut by 1227 about 80%, while 55% by NaClO. The proteins were reduced by NaClO about 53%, while only 30% by 1227. The potentiodynamic polarization shows that the corrosion potential of SS316L was enhanced from -0.495 V to -0.390 V by the chemical additives, delaying the occurrence of the corrosion. And the corrosion rate was also reduced from 5.19 × 10^-3 mm·a^-1 to 2.42 × 10^-3 mm·a^-1. But NaClO still caused pitting corrosion after sterilizing the bacteria, while 1227 can form a protective film on the surface of SS316L. Though HEDP contribute to the bacteria activity, it can enhance the breakdown potential. XPS results confirmed that 1227 can change the value of C:O in the biofilm attached on metal surface, and NaClO can eliminate the existence of amidogen. This study would provide some recommendations for the selection of chemical additives in the thermal power plant.

Open image in new window

     

Combined application of chemical fertilizer with green manure increased the stabilization of organic carbon in the organo-mineral complexes of paddy soil

Environmental Science and Pollution Research - The influence of the combined application of chemical fertilizer with green manure on the stabilization of organic carbon (C) was explored in the...     

Some technical issues in managing PCBs

Polychlorinated biphenyls (PCBs) were important industrial chemicals featuring high thermal and chemical stability and low flammability. They were widely used as dielectric and thermal fluid in closed electro-technical applications (transformers, capacitors…) and also in numerous dispersive uses, ranking from auto-copying paper to sealant or coatings. During the 1960s, severe environmental consequences started becoming apparent. The stability of PCBs contributed to their persistence in the environment, their lipophilic character to bio-magnification. Fish-eating species seemed threatened in their existence. In Japan and in Taiwan, thousands of people consumed PCB-contaminated oil. The production of PCBs stopped completely during the 1980s. Usage could continue in closed applications only. In this paper, particular attention is given to two issues: the cleaning of PCB electric transformers and the potential impact of PCB-containing building materials. Other contributions will cover the management and treatment of PCB-contaminated soil, sludge or fly ash. The complete survey is being prepared by request of the Knowledge Center for Engineers and Professionals.     

SGA对垃圾焚烧飞灰中重金属的固化性能研究

根据EPA1311、HJ／T299—2007、HJ／T300—2007和HJ557—2009等国内外不同标准，研究了深圳某垃圾焚烧发电厂垃圾焚烧飞灰的浸出毒性，探讨了六硫代胍基甲酸（sixthioguanidineacid，SGA）、二甲基二硫代氨基甲酸盐（sodiumdimethyldithiocarbamate，SDD）和Ca（OH）2浓度对垃圾焚烧飞灰中重金属的固定性能的影响。研究结果表明，随着浸提液pH的降低，该厂焚烧飞灰中大部分金属元素的浸出量增大，焚烧飞灰浸出液中的cd、Ni、Ph和zn浓度分别超过国家危险废物鉴别标准（GB5085．3—2007）规定值的4．75倍、1．47倍、6．72倍和2．20倍，属于危险废弃物，必须进行稳定化处理。当固化剂SGA加入量为0．1mol／kg时，稳定化后的重金属浸出浓度已经低于危险废物鉴别标准，且对Cd、Cr、Cu和Pb的固化性能优于SDD和Ca（OH）2；当固化剂SGA、SDD和Ca（OH）2加入量为0．5mol／kg时，稳定化后的焚烧飞灰重金属浸出浓度均低于国家危险废物鉴别标准（GB5085．3-2007）中的规定值。与SDD和Ca（OH）：相比，SGA对垃圾焚烧飞灰中重金属的固化处理更具有优势。